Skip to content
DREAMESOURCE

Non-road mobile machinery

DS-101 10.1" Integrated HMI Terminal

Flagship in-cab terminal for complex machine control: 10.1" capacitive display with a rotary encoder and six physical keys, RK3568J compute, dual CAN and four AHD camera inputs. Entry point for full machine control systems, not only for indication.

Specification

Electrical
Supply voltage
9–36 V DC
Power consumption
500 mA @ 24 V DC
Core
Processor
Rockchip RK3568J · Quad-core 64-bit Arm Cortex-A55
Memory
4 GB
Storage
32 GB
Operating system
Linux
Display
Screen size
10.1 in
Resolution
1280×800
Brightness
1000 cd/m²
Touchscreen
Capacitive (PCAP)
Environment
Operating temperature
-30–+75 °C
Storage temperature
-40–+85 °C
Ingress protection
IP65 up to IP67
Interfaces
CAN
2× CAN 2.0B 20 kbit/s – 1 Mbit/s (default 125 kbit/s)
Video inputs
4× AHD · 1080P
Ethernet
10/100 Mbit/s auto-negotiating
Serial
1× RS-232 / RS-485, up to 115200 bit/s, point-to-point
USB
High-speed USB (programming, update, music)
Audio
1× speaker output, 20 W
Wireless & positioning
Available on request — regional variants confirmed per market and per order
Human interface
Operation
Capacitive (PCAP) plus physical keys and rotary encoder
Mechanical
Dimensions (W×H×D)
311.1 × 183.78 × 65.95 mm
Mounting plate
308.3 × 181.08 mm
Housing
Aluminium rear housing, dual-shot injection-moulded front bezel
Connector
2× TE 34-pin (4–1437290–0 / 4–1437290–1) with 3–1447221–4 contacts

Wireless & positioning

Available on request

LTE bands and GNSS constellations differ by market and are confirmed per order. We do not publish unverified frequency lists.

Dimensions & mounting

Generated from the same specification data as the table below and the datasheet. One source, so they cannot disagree.

FRONT VIEW — DS-101, 10.1" Integrated HMI Terminal. WIDTH 311.1 mm, HEIGHT 183.78 mm, DEPTH 65.95 mm.

SCALE
1:1
UNITS
mm
REV
v1.0
DATA SOURCE
specs/ds-101.json
WIDTH
311.1 ± 0.2 mm
HEIGHT
183.78 ± 0.2 mm
DEPTH
65.95 ± 0.3 mm
Mounting plate
308.3 × 181.08 mm

4× M5×4 ISO-TAPPING 10.0

Mounting
Bracket mount (A8 bracket: 30° tilt · RAM bracket: 60° tilt / 60° swivel) or flush mount. 4× M5×4, ISO-TAPPING 10.0.
Housing
Aluminium rear housing, dual-shot injection-moulded front bezel

Pinout

Interface 1 — 34-pin

Connector housing
TE 4-1437290-0
Contact
TE 3-1447221-4
Contacts
34
  • 1 CAN1_H CAN1 high
  • 2 GND Analog ground
  • 3 GND Analog ground
  • 4 SPK_P Speaker output (20 W)
  • 5 SPK_N Speaker output (20 W)
  • 6 GND Analog ground
  • 7 UPDATE Firmware update
  • 8 GND_GPS GNSS antenna cable shield
  • 9 ANT_GPS GNSS antenna centre conductor
  • 10 CAN1_L CAN1 low
  • 11 CAN2_H CAN2 high
  • 12 CAN2_L CAN2 low
  • 13 GND Analog ground
  • 14 232RX/485_B RS-232 RX / RS-485 B
  • 15 232TX/485_A RS-232 TX / RS-485 A
  • 16 AHD_Y2 AHD 1080P camera 3
  • 17 AHD_Y3 AHD 1080P camera 4
  • 18 LAN_A+ RJ45 Ethernet
  • 19 LAN_A- RJ45 Ethernet
  • 20 GND Analog ground
  • 21 IGNITION Ignition signal
  • 22 USB_DP USB data +
  • 23 USB_DM USB data −
  • 24 AHD_Y0 AHD 1080P camera 1
  • 25 AHD_Y1 AHD 1080P camera 2
  • 26 LAN_B+ RJ45 Ethernet
  • 27 LAN_B- RJ45 Ethernet
  • 28 GND Analog ground
  • 29 DCIN_9-36V Supply positive
  • 30 DCIN_9-36V Supply positive
  • 31 DCIN_GND Supply negative
  • 32 DCIN_GND Supply negative
  • 33 VCC12V_OUT 12 V regulated output, 2 A max
  • 34 VCC5V_OUT 5 V regulated output, 1 A max

Interface 2 — 34-pin

Connector housing
TE 4-1437290-1
Contact
TE 3-1447221-4
Contacts
34
  • 1 12V 12 V power output, 2 A max
  • 2 5V 5 V power output, 1 A max
  • 3 GNDA Signal ground
  • 4 DO8 Digital output
  • 5 DO7 Digital output / analog voltage output / analog input
  • 6 DO6 PWM high-side output, max. drive current 3 A
  • 7 DO5 Digital output, max. drive current 3 A
  • 8 DO4 PWM high-side output with current feedback, 0.2–3 A, duty 0–100%
  • 9 DO3 Digital output
  • 10 DO2 Digital output, 50–500 Hz, ±2% FS
  • 11 DO1 Digital output, 0–32 V, ±1% FS
  • 12 PI4 Frequency / binary input, 1 Hz – 10 kHz
  • 13 PI3 Frequency / binary input, 1 Hz – 10 kHz
  • 14 PI2 Frequency / binary input, 1 Hz – 10 kHz
  • 15 PI1 Frequency / binary input, 1 Hz – 10 kHz
  • 16 VAR8 Analog input, resistance 20 Ω – 7 kΩ, ±3% FS
  • 17 VAR7 Analog input, voltage 0–32 V, ±1% FS; current 0–20 mA, ±1% FS
  • 18 Hbridge1_V2 H-bridge 1 output electrode
  • 19 VAR6 Analog / digital input, resistance 0–10 kΩ, ±2% FS
  • 20 VAR5 Analog / digital input, voltage 0–32 V, ±1% FS
  • 21 VAR4 Analog input, resistance 0–600 Ω, ±1% FS
  • 22 VAR3 Analog input, voltage 0–32 V, ±1% FS
  • 23 VAR2 Analog input, current 0–20 mA, ±1% FS
  • 24 VAR1 Analog input
  • 25 Hbridge2_V2 H-bridge 2 output electrode
  • 26 Hbridge1_V1 H-bridge 1 output electrode
  • 27 GNDA Signal ground
  • 28 GND Supply negative
  • 29 GND Supply negative
  • 30 GND Supply negative
  • 31 VCC Supply positive
  • 32 VCC Supply positive
  • 33 VCC Supply positive
  • 34 Hbridge2_V1 H-bridge 2 output electrode

Tested to

Reported against these standards in our test documentation. Where the original report cites a GB/T equivalent, both are shown.

  • IEC 60068-2-27 Environmental testing — Part 2-27: Tests — Test Ea and guidance: Shock Reported against GB/T 2423.5 in our Chinese test documentation.
  • IEC 60068-2-30 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic (12 h + 12 h cycle) Reported against GB/T 2423.4 in our Chinese test documentation.
  • IEC 60529 Degrees of protection provided by enclosures (IP Code) Reported against GB/T 4208. The IP65 / IP67 ratings on our datasheets are cited to this standard.
  • IEC 60068-2-64 Environmental testing — Part 2-64: Tests — Test Fh: Vibration, broadband random and guidance Reported against GB/T 2423.56 in our Chinese test documentation.
  • ISO 10605 Road vehicles — Test methods for electrical disturbances from electrostatic discharge Reported against GB/T 19951 in our Chinese test documentation.
  • IEC 61000-4-4 Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test Reported against GB/T 17626.4 in our Chinese test documentation.
  • ISO 7637-2 Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only Reported against GB/T 21437.2 in our Chinese test documentation. Same test method — convertible to an IEC/ISO report without re-testing.
  • ISO 7637-3 Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines Reported against GB/T 21437.3 in our Chinese test documentation.

Certification status

Anything marked Planned is on our roadmap and is not available today. Do not design it into a machine on the assumption that it is.

DS-101 — Certification status
EMC Directive 2014/30/EU Planned
Radio Equipment Directive 2014/53/EU Planned
RoHS 2011/65/EU Planned
REACH (EC) 1907/2006 Planned
WEEE (Germany) ElektroG Planned
ISOBUS / ISO 11783 (UT) Planned
View all certifications

Related models