İçeriğe geç
DREAMESOURCE

Yol dışı mobil makineler

DS-81 8" entegre HMI terminali

The same platform capability in a lighter, smaller enclosure — for compact and mid-size machines where the 10.1" terminal is too large. Identical toolchain, identical protocol support, identical remote service.

Specification

Electrical
Supply voltage
9–36 V DC
Power consumption
500 mA @ 24 V DC
Core
Frequency
1.4 (up to 2.0) GHz
Memory
2 GB
Storage
32 GB
Operating system
Linux
Display
Screen size
8 in
Resolution
1280×720
Brightness
700 cd/m²
Touchscreen
Capacitive (PCAP)
Environment
Operating temperature
-30–+70 °C
Storage temperature
-40–+85 °C
Ingress protection
IP65 up to IP67
Interfaces
CAN
2× CAN 2.0B 20 kbit/s – 1 Mbit/s
Video inputs
4× AHD · 1080P / 720P
Ethernet
RJ45
Serial
1× RS-232 / RS-485
USB
USB programming, update, music
Audio
External 15 W speaker output, built-in 3 W speaker output
Wireless & positioning
Available on request — regional variants confirmed per market and per order
Human interface
Operation
Capacitive (PCAP) plus physical keys and rotary encoder
Mechanical
Dimensions (W×H×D)
230.5 × 155.62 × 44.55 mm
Mounting plate
204.51 × 137.14 mm
Housing
Aluminium
Connector
TE 34-pin (4–1437290–0) with 3–1447221–4 contacts

Kablosuz ve konumlama

Available on request

LTE bands and GNSS constellations differ by market and are confirmed per order. We do not publish unverified frequency lists.

Dimensions & mounting

Generated from the same specification data as the table below and the datasheet. One source, so they cannot disagree.

FRONT VIEW — DS-81, 8" entegre HMI terminali. WIDTH 230.5 mm, HEIGHT 155.62 mm, DEPTH 44.55 mm.

SCALE
1:1
UNITS
mm
REV
v1.0
DATA SOURCE
specs/ds-81.json
WIDTH
230.5 ± 0.2 mm
HEIGHT
155.62 ± 0.2 mm
DEPTH
44.55 ± 0.3 mm
Mounting plate
204.51 × 137.14 mm

4× M5×4 ISO-TAPPING 10.0

Mounting
Bracket mount (A8 bracket: 30° tilt · RAM bracket: 60° tilt / 60° swivel) or flush mount.
Housing
Aluminium

Pinout

Interface — 34-pin

Connector housing
TE 4-1437290-0
İletişim
TE 3-1447221-4
Contacts
34
  • 1 CAN1_H CAN1 high
  • 2 RESERVED Reserved (optionally analog ground)
  • 3 RESERVED Reserved (optionally analog ground)
  • 4 SPK_P Speaker output (15 W)
  • 5 SPK_N Speaker output (15 W)
  • 6 RESERVED Reserved (optionally analog ground)
  • 7 UPDATE Firmware update
  • 8 RESERVED Reserved — optionally coaxial (GND_GPS shield / ANT_GPS centre)
  • 9 RESERVED Reserved — optionally coaxial (GND_GPS shield / ANT_GPS centre)
  • 10 CAN1_L CAN1 low
  • 11 CAN2_H CAN2 high
  • 12 CAN2_L CAN2 low
  • 13 RESERVED Reserved (optionally analog ground)
  • 14 232RX/485_B RS-232 RX / RS-485 B
  • 15 232TX/485_A RS-232 TX / RS-485 A
  • 16 AHD_Y2 AHD 1080P camera 3
  • 17 AHD_Y3 AHD 1080P camera 4
  • 18 LAN_A+ RJ45 Ethernet
  • 19 LAN_A- RJ45 Ethernet
  • 20 GND Analog ground
  • 21 IGNITION Ignition signal
  • 22 USB_DP USB data +
  • 23 USB_DM USB data −
  • 24 AHD_Y0 AHD 1080P camera 1
  • 25 AHD_Y1 AHD 1080P camera 2
  • 26 LAN_B+ RJ45 Ethernet
  • 27 LAN_B- RJ45 Ethernet
  • 28 GND Analog ground
  • 29 DCIN_9-36V Supply positive
  • 30 DCIN_9-36V Supply positive
  • 31 DCIN_GND Supply negative
  • 32 DCIN_GND Supply negative
  • 33 VCC12V_OUT 12 V regulated output, 1 A max
  • 34 VCC5V_OUT 5 V regulated output, 1 A max

Tested to

Reported against these standards in our test documentation. Where the original report cites a GB/T equivalent, both are shown.

  • IEC 60068-2-27 Environmental testing — Part 2-27: Tests — Test Ea and guidance: Shock Reported against GB/T 2423.5 in our Chinese test documentation.
  • IEC 60068-2-30 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic (12 h + 12 h cycle) Reported against GB/T 2423.4 in our Chinese test documentation.
  • IEC 60529 Degrees of protection provided by enclosures (IP Code) Reported against GB/T 4208. The IP65 / IP67 ratings on our datasheets are cited to this standard.
  • IEC 60068-2-64 Environmental testing — Part 2-64: Tests — Test Fh: Vibration, broadband random and guidance Reported against GB/T 2423.56 in our Chinese test documentation.
  • ISO 10605 Road vehicles — Test methods for electrical disturbances from electrostatic discharge Reported against GB/T 19951 in our Chinese test documentation.
  • IEC 61000-4-4 Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test Reported against GB/T 17626.4 in our Chinese test documentation.
  • ISO 7637-2 Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only Reported against GB/T 21437.2 in our Chinese test documentation. Same test method — convertible to an IEC/ISO report without re-testing.
  • ISO 7637-3 Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines Reported against GB/T 21437.3 in our Chinese test documentation.

Certification status

Anything marked Planned is on our roadmap and is not available today. Do not design it into a machine on the assumption that it is.

DS-81 — Certification status
EMC Directive 2014/30/EU Planned
Radio Equipment Directive 2014/53/EU Planned
RoHS 2011/65/EU Planned
REACH (EC) 1907/2006 Planned
WEEE (Germany) ElektroG Planned
View all certifications

Related models